SAFETY MANUAL
Electrical safety
NRG1001 generator is high voltage equipment. Please be very careful and
operate by qualified personnel only.
There is a risk of electric shock, strong electromagnetic interference,
damage of generator or other electronic equipment in case of improper use.
Do not switch on the generator without proper grounding. We recommend
using grounding cable connected to the terminal on the rear panel of the
generator or three terminal power supply outlet with ground contact.
It is strongly prohibited to switch on the generator without output coaxial
cable. There is a risk of electrical arcing on the open coaxial connector and
damage of output circuit of the generator. Please use our special high
voltage coaxial connector and cable only.
When adding or removing generator to or from the system, ensure that the
power supply ON/OFF toggle is switched off and power supply cable is
unplugged before the output cable is connected or disconnected.
Please connect or disconnect any equipment while the generator is in high
voltage OFF state only by HV ON/HV OFF switch.
Operation safety
Please read this manual before installing and using of the generator.
Before using the product, make sure that all cables are applicable and not
damaged. High voltage connectors should be clean and dry, free from dust,
dirt and any obstacles.
To avoid short circuit, keep metal parts like clips, screws and staples away
from the generator.
The generator is designed to work in normal laboratory conditions. Avoid
dust, humidity and temperature extremes. Do not place the generator in any
place where it may become wet.
Place the generator on a stable surface.
If you encounter any technical problem with the generator, please contact
with Megaimpulse Ltd. Please, do not try to repair the generator by
yourself.
MEGAIMPULSE LTD. 2
