7
Stainless Steel Tank Cleaning Instruction
Attention: During operation and cleaning, please avoid any water contacting the sockets on the water
distiller and the power cords in order to prevent the short circuit.
Attention
※
If the level of
residue remaining
inside the stainless steel tank is too thick, please repeat
the steps mentioned above until the stainless steel tank is completely clean.
※
The cleaner used for this product is food-grade and it’s completely harmless to human
body, thus please use with ease.
※
Please clean the stainless steel tank regularly in order to prevent too much
residue
build-up
inside the distiller as this could greatly decrease the machine’s heating
efficiency.
※
Please do not use any abrasive cleaner or brushes to clean the distiller in order to avoid
damaging the surface of the stainless steel tank.
※
Please do not immerse any part of the distiller in water and please keep the distiller’s
exterior as dry as possible.
※
After cleaning the stainless steel tank, please make sure that both power cords remain as
dry as possible. If the power cords come in contact with water, please use dry towels to
wipe water off of the power cords in order to prevent leakage.
※
Please use vacuum cleaners or air guns to clean the aluminum fins and fan blades
regularly in order to prevent too much dust covering the aluminum fins and fan blades,
which would cause the distiller to overheat.
※
Please make sure that the stainless steel tank of the water distiller remains clean when the
machine is not used in order to avoid any corrosion due to excess residue.
1. Please remove the top and pour hot water into the
stainless steel tank until the water level has surpassed
the residue build-up.
2. Please add 1-4 teaspoon of cleaner to the stainless steel
tank (the amount of the cleaner added depends on how
much residue remains in the stainless steel tank).
3. Please connect the main power cord to the wall outlet
then press the RESET button and allow the distiller to
heat up for at least 20 minutes before unplugging the
power cord from the wall outlet. Please wait until the
distiller has completely cooled down and then wipe the
residues with a cloth or dishtowels (do not use anything
that will scratch the stainless steel and please make sure
that the steps above are performed in a well-ventilated
area).
