6
Distillation Process
1.
Remove the top from the distiller then
pour water into the stainless steel tank.
※
Please do not surpass the "FULL" line
(Please check the image on the right).
※
Using hot or boiled water can reduce the distillation time
2.
Place the top back onto the distiller then insert the two power cords into the sockets on the distiller
and please make sure both power cords have been plugged
in
properly by
verifying
the white lines
on both power cord plugs are no longer visible in order to avoid poor connection (please check the
images below).
3. Please make sure that the steps above (steps: 1&2) are performed properly before
pressing down the RESET button. When the fan starts running after hitting the RESET
button, it means the distiller is starting to heat up.
4. During each distillation
process
, a water container (PP or glass bottle, or any other type of
water container) must be placed underneath the distiller nozzle to collect the distilled water.
Attention to Power cords
1. Please do not shake the plug while pulling it out. Just pull out the plug directly to avoid damaging
the plug terminals.
2. Before each distillation process, please verify that the power cords are connected properly to the
distiller in order to avoid a bad connection, or damage to the distiller.
3. Power cord is one of the consumables. If power cord has any abnormality (for example: the plastic
appearance has melted or deformed), please stop using it
and replace with a new one.
Attention
1. Make sure you use the correct voltage, and please do not use any transformer.
2. Please do not share the same outlet with other electrical appliances in order to prevent overloading.
3. Please keep the distiller exterior dry and please do not immerse the distiller in water.
4. Please place the distiller in a well-ventilated place during the distillation process.
5. Please keep a minimum space of 20cm above the distiller top in order to help the distiller cool down.
6. Please place the distiller on a flat surface in order to avoid it from sliding or falling.
7. This appliance is not intended for use by person (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
8. Please do not put any flammable materials under the distiller.
9. Please do not remove the top during the distillation process in order to avoid injury caused by the
hot steam.
10. After each distillation, please give the machine at least 20 minutes to cool down before starting
another distillation process.
Ð
Ð
!
