EXPANDER GSM „”
® 2G
www.megaelektronik.com.pl
Strona 8
Installation
EXPANDER GSM module "" ®
Should be installed in rooms
with normal humidity, temperature in the range
-20 ° C to +50 ° C.
When choosing a mounting location should be directed
the following criteria:
• Range of GSM network (SIM card operator used for the module).
(Range less than 50% - use an external antenna ANT-GSM 3M)
• The availability and distance from sources of alarm signals and power.
• Availability of facilities for third parties and attempts to sabotage.
• Behavior safe distance from sources of potential interference
(Eg switching WN -, radio transmitters, etc.).
The start-up module.
1st Perform a complete wiring: signal and power.
2nd Install the SIM card in the module, connect the antenna to the RF socket
3rd Connect an optional accessory.
4th Connect the wires to the appropriate module.
5th Turn on the power module. (Rechargeable battery will not work without main power)
6th Connect via the Internet or cable (IP-1 USB) that connects the computer with the module
and enable the configuration program.
7th Configure the module as needed, and disconnect the USB cable from the module.
8th Perform tests.
9th Trained user.
Power device
INTEGRAL module can be powered by alternating voltage or constant
range from 7, 5V to 27V. Do not power the device simultaneously and alternating voltage. Pay special attention
to the way the power to connect DC to AC power outlet or AC voltage to DC power jack threatens serious
damage to the module. When connecting the battery pack should be applied to the parameters given in the
table.
Connected battery
voltage (V min.)
Voltage
Devices (V min.)
12V
14, 5V
24V
26, 5V
