Mega MULTITRUCK 400 - 600, Руководство пользователя

Страница: 27 / 46

20
Mounting the sliding sheaf on the stationary sheaf
,
To make sure the pulley works properly,
remember to put back between the two
pulleys as many spacing washers as you
removed when you disassembled it.
Mounting the spring on the sliding sheaf
,
Place the spring in the sliding sheaf (4) in the same
position as when you disassembled it.
Place the pin (7) on the shaft of the stationary sheaf (1)
Mounting the cam
To mount the cam (6), use the disassembling procedure in reverse.
•
Place the spring in the cam in the same position as when
you disassembled it.
•
Lock the cam into position on the stationary sheaf (1)
and on the pin (7).
•
Keep the stationary sheaf and the cam (6) from moving.
Turn the sliding sheaf (4) counter clockwise one third (1/3) of a turn.
•
Lower the cam to lock the cam fittings in place (4B).
•
Install the retaining ring (8).