Mega MULTITRUCK 400 - 600, Руководство пользователя

Страница: 10 / 46

3
Important Notice
Only qualified personnel can perform maintenance and repair operations on the
variable speed transmission system.
¾
L
Means there is a risk of serious injury if the instructions are not followed as
described.
¾
,
Means that, when performing this step, there is a risk of damaging a part or of the
components malfunctioning.
¾
CVTech-IBC is held harmless of any and all liability as concerns damage or injury
resulting from the incorrect understanding of the text, improper use of the transmission
system, or improper use of the recommended tools.
¾
It is very important that you use the tightening torque indicated.
Maintenance Frequency
The transmission system does not require any lubrication. It is designed to work without
lubricants. Given this, you have to apply certain rules of cleanliness when handling the system
to avoid having any products come into contact with its components.
To increase the life of the transmission system, it is strongly recommended that you inspect
the following:
Description Inspection Maintenance Interval
Drive pulley
Visual
General condition
at 10 000 km
Stationary sheaf Visual at 10 000 km
Sliding sheaf Visual at 10 000 km
Assembled centrifuge
unit
Visual at 10 000 km
Lower bearing Visual Replace at 10 000 km
Spring Visual at 10 000 km
Upper bearing Visual Replace at 10 000 km
Driven pulley
Visual
General condition
at 10 000 km
Stationary sheaf Visual at 10 000 km
Sliding sheaf Visual at 10 000 km
Cam fittings Dimensional (see page 18) at 10 000 km
Spring Visual at 10 000 km
Drive belt
Visual
Dimensional (see page 8)
at10 000 km