2.3 Firmware Upgrade
This is to upgrade or re-load the firmware to the NetAgent
A
unit. Firmware version is
available on the official website. Ensure to check the NetAgent
A
model, hardware
version for the correct firmware version (.bin)
Ways to select NetAgent
A
for firmware upgrading
(1) Click on specific NetAgent
A
from the Netility list
(2) Press and hold on CTRL key then select multi NetAgent
A
unit from the list=>This
is to upgrade multi units at once
(3) Click on the first NetAgent
A
from the list, then press and hold on SHIFT key as
well as click on the last unit of the NetAgent
A
=>This is if all NetAgent
A
from the list
are same model
If any failure during firmware upgrading, please upgrade again until it is successfully
done
While upgrading, red and yellow LED would alternating flashing, or red led flashing.
DO NOT remove any power or cable to the NetAgent
A
. Once firmware is successfully
upgraded, NetAgent
A
would reboot automatically.
WARING
：
Please makes sure the multi NetAgent
A
selected are same model
Upgrade Single
NetAgentA
Selection of Multi-NetAgentA
Upgrade consecutive
NetAgentA
1.Select .bin file
2.Click on Download
3. Upgrade message
4. Cancel to exit
