18
LED Status
1.
Power LED
2.
Warning LED
3.
Hz Frequency LED
When the equipment powers on, the (1.) Blue LED will illuminate and the (3.) Hz LED
will start to flash red and green in time with the Hz setting. If (2.) Warning LED starts
to flash or is solid red, check the ion level with the BarMaster.
Strobing Red
for 2 seconds indicates the BarMaster has been connected
Flashing Red
on and off indicates more cleaning required
Solid Red
indicates the ion level has dropped well below
the alarm setting, prompting a serious fault warning. Check
installation for metallic objects on the emitter pins.
Should the solid red LED persist, connect your BarMaster and
follow the Troubleshooting section or contact your local Meech
distributor
