Meech A70000, Руководство по эксплуатации

Страница: 13 / 24

13
6. Installation
The drawing below shows the recommended way to fit a Meech Cabinet Cooler and
Cabinet Cooler System (including digital thermostat and solenoid valve).
Solenoid
Valve
Cabinet Wall
Ducting
Filter
240v/110v/24v
Thermocouple
Digital
Thermostat
Air Inlet
Cabinet Cooler
To fit the Cabinet Cooler follow the steps below:
A. Drill Hole
Drill 1.02” (26 mm) hole in the position you would like to fit the Cabinet Cooler.
Please be aware that 200mm of the Cabinet Cooler will extend from the outside of
the enclosure so allow clearance.
It’s recommended that the Cabinet Cooler is installed in the top of the enclosure.
However, if space is an issue the Cabinet Cooler can be installed in any position, even
upside down, with no loss of performance.