Meech 977CM, Руководство по эксплуатации

Страница: 18 / 28

Changing the System Set Up
The Set Up option allows the setting of the Feedback gain and controls the operation
of the in-built audible alarm.
The 977CM allows the use of an external Feedback sensor bar to monitor the
accuracy of the system’s static neutralisation. When a Meech 988 Feedback bar is
connected to the 977CM a bar chart on the LCD display shows the residual balance of
static charge on the material after passing the ionising bar. The feedback gain adjusts
the sensitivity of the bar graph. The setting is from 1 to 10. An increase of 1 represents
a doubling of sensitivity of the bar graph.
See the section on Feedback on page 18 for full details of how to use the Feedback system.
The In-built audible alarm can be enabled or disabled to suit the installation.
To set the Feedback gain and audible Alarm operation
1. Press to enter menu.
2. Select option 6 “Setup” using the down button and press
3. Set the desired gain level using the Up and Down buttons and store the value by
pressing
4. The screen will now display “Buzzer Enabled” .
5. Select “Yes” or “No” using the or button and press to store the
setting.
16