background image

Repairs and Warranty

Your Ion Nozzle is warranted by Meech Static Eliminators Ltd to the original purchaser 
against defects in material and workmanship for one year after purchase. Should any 
malfunction occur, please return the Ion Nozzle directly to Meech or to your distributor. 
All products returned to the factory MUST be accompanied by a return authorisation 
number and must be shipped prepaid. Meech Static Eliminators Ltd. liability under this 
warranty is limited to replacing or repairing any unit returned by the purchaser that has 
not been subject to misuse, neglect, repair, alteration or accident. In no event shall 
Meech Static Eliminators Ltd be liable for collateral or consequential damages.

For prompt service, ship the unit to the factory with the return authorisation number 
shown clearly on the label. Be sure it is well packed in a sturdy carton with shock 

absorbing material. Include a note stating the nature of the problem as specifically as 

possible, and also include instructions for returning the Ion Nozzle to you. Meech will 
pay one-way return surface shipping costs on any repairs covered under the warranty.

Field repairs should not be undertaken during the warranty period. Repair attempts by 

unqualified personnel will invalidate the warranty.

Important

Your Ion Nozzle has been designed to minimise effects of localised static charges. 

If your processing involves generation of considerable static charges, however, you 
may need more powerful equipment. Meech Static Eliminators Ltd manufactures a 
complete range of Ionising Blowers, Air Guns, Bars and overhead room systems to 
meet all your Static Elimination requirements.

12

Содержание 261v2

















Отзывы: