EN
28
DESCRIPTION
1.
Power cord
2.
Dust collector
3.
Sanding plate
4.
Power switch
5.
Handle
USE
Intended use
The tool is intended for dry sanding of wood, plastic, metal, filler, and painted surfaces.
Replacing sand paper
NOTE:
Switch off the tool, unplug the power cord, switch off the tool, and wait until all moving parts
have completely stopped before working on the tool.
1.
Lift up the edge of the sand paper and pull it off from the sanding pad.
2.
Clean the sanding pad.
3.
Press the new sand paper firmly on the sanding pad. Align the holes in the sand paper with
the holes in the sanding plate for best dust extraction.
Replacing the sanding pad
1.
In order to replace the sanding pad, first remove the sand paper.
2.
Align the new sanding pad so that the drive engages in the recess in the sanding pad.
3.
Immediately replace the sanding pad if it is damaged.
