EN
33
DESCRIPTION
INTENDED USE
The garden pump can be used for tap water supply, pressurising pipes, pumping up well water,
garden watering, fish farming, poultry rearing etc�, or can be combined with other equipment�
Pump only clean water and other non-corrosive liquids with low viscosity - the garden pump must
not be used to pump flammable, explosive or corrosive liquids, or liquids containing solid particles or
fibres� The water should have a pH value between 6�5 and 8�5�
NB
This type of garden pump may be incorporated into a fully automated system with pressure switch,
expansion tank etc� The automated pump mechanism works as follows: When the power is on, the
pump starts automatically when the tap is opened, and stops when the tap is closed� If any form of
water tower is used together with the automatic garden pump, the pump must be connected to the
upper level sensor, so that it starts and stops on the basis of the water level in the tower�
TYPE PLATE
COMPLIANCE
SS-EN 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements�
SS-EN 60335-2-41 Household and similar electrical appliances - Safety - Part 2-41: Special
requirements for pumps�
2006/95/EG Low-voltage directive�
Pump housing material: I (cast iron), P
(plastic) or S (stainless steel)
Rated output (W)
Garden pump
L K J
X
X
