![Meec tools 703-040 Скачать руководство пользователя страница 88](http://html1.mh-extra.com/html/meec-tools/703-040/703-040_operating-instructions-manual_1763608088.webp)
88
•
Be careful when sawing in splintered wood. Pieces of sawn wood can fly away – risk of personal
injury.
•
Do not use the saw to move or shove pieces of wood out of the way.
•
When trimming off branches the saw should be supported by the trunk, if possible. Do not saw with
the tip of the bar – risk of kickback.
•
Limbing should only be carried out by qualified personnel.
Risk of injury!
•
Watch out for branches under pressure. Freely hanging branches should not be sawn from
underneath.
•
Do not carry out limbing while standing on the trunk.
•
The tool must not be used to fell and/or limb trees in the forest. The power cord can limit the safety of
the user and the freedom to move.
•
Always stand to the side of the tree being felled.
•
Watch out for falling branches when you step backwards after sawing.
•
When working on sloping group the user must either stand above or to the side of the trunk or felled
tree.
•
Watch out for tree trunks that can start to roll.
Risk of kickback!
•
Kickback can happen when the tip or nose of the bar comes into contact with wood or some other
solid object. föremål. The saw can then kickback with considerable uncontrolled force towards the
user – risk of personal injury.
Cross-cutting wood
Follow all the instructions and safety instructions when cross-cutting wood.
Secure the timber by wedging it with wooden blocks. Never saw any other material than wood. Check that
the chain cannot come into contact with stones or nails etc. They can be ejected and damage the chain.
Make sure that the saw does not come into contact with any fencing, or the ground. Make sure that the
tool is supported when removing branches, if possible. Do not saw with the tip of the bar. Watch out for
obstacles such as stumps, roots, hollows and heaps on the ground – risk of tripping up.