Meec tools 251-019, Руководство по эксплуатации

Страница: 41 / 44

EN
41
USE
Intended use
• The concrete mixer is only intended for private use.
• Never overload the concrete mixer.
• The concrete mixer is intended for mixing concrete and mortar.
• In addition to these instructions you should always comply with local regulations and laws concerning health & safety and the environment.
• The concrete mixer must only be used and maintained in accordance with these instructions and by qualified personnel. The manufacturer cannot
accept any liability for damage resulting from modifications to the concrete mixer that have not been approved by the manufacturer.
• Only use accessories and tools recommended by the manufacturer.
• All other use is prohibited. The manufacturer cannot be held liable for any damage resulting from any other use.
Positioning
• Only use the concrete mixer on a firm, level surface.
• Make sure the concrete mixer is not standing on the power cord.
• Route the power cord so that it cannot be trod on or clenched.
NOTE: It must be possible to swivel the drum to the left and right. There must be space for a wheelbarrow or other suitable container under the drum
when emptying.
USE
NOTE: Do not use the concrete mixer if it is damaged or not working properly, or if the power cord or plug are damaged.
Starting/switching off
Connect the concrete mixer to the mains and press the I (green button) to start. Press 0 (red button) to switch off.
Adjusting the tilting of the drum
1. Pull the wheel towards you and turn it to change the angle of the drum.
2. Allow the wheel to spring back and lock in the lock plate when the drum has the required angle.
Filling
• Check before filling that the drum opening is aligned so that the material cannot drop out from the drum.
• The drum should rotate during the filling. Do not overfill the drum.
WARNING: Risk of personal injury from moving parts.
Filling position for mortar. Filling position for concrete.