EN
53
7.
Tighten the saw table’s locking screw.
8.
Place the work piece against the work piece fence.
9.
Stand to the left of the handle.
10.
Release saw head guide’s locking screw move the saw head over the work piece.
11.
Press in the trigger catch.
12.
Hold in the trigger and lower the saw head slowly all the way to its lower end position.
13.
Release the trigger and raise the saw head slowly all the way to its upper end position
(starting position).
Mitre sawing of bevelled cut
WARNING:
Unplug the tool from the power outlet before cleaning sawdust from the saw head
guide. The saw table insert can be removed to facilitate cleaning. The extra fence must be reset to
correspond with the new saw cut angle.
1.
Fit the extra fence in the new equivalent position.
2.
Move the saw head to its rear end position on the saw head guide and lock it with the locking
screw.
3.
Move the saw table and bevel angle arm to the desired angle.
4.
Lock the saw table.
5.
Lock the bevel angle arm.
6.
Secure the work piece with the clamping device.
7.
Release the saw table guide’s locking screw.
8.
Press in the trigger catch and the switch.
9.
Lower the saw head slowly.
10.
Sawing direction: forward and backward.
11.
Release the trigger and raise the saw head slowly all the way to its upper end position
(starting position).
Support for the work piece
• Long work pieces need extra support outside the saw table to lie flat and stable.
• Keep your hands at least 200 mm from the saw blade while holding the work piece.
• When cutting the work piece must be stable and securely held on the saw table.
