20
ENGLI SH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use
Warning:
Save these Operating Instructions for future reference. Failure to follow all the instructions below can
result in electric shock, fire and/or serious personal injury.
Work area
Keep the work area clean and well lit.
Dark and cluttered work areas increase the risk of accidents and injuries.
Do not use power tools in explosive environments, such as in the vicinity of flammable liquids,
gases or dust. Power tools produce sparks that can ignite dust and fumes.
Keep children and onlookers at a safe distance when using the tool.
You can easily lose control of the equipment if you are distracted.
Electrical safety
The plug on the power tool must match the mains outlet. Never modify the plug in any way. Never
use an adapter with earthed power tools. Unmodified plugs and matching outlets reduce the risk of
electric shock. Double insulation eliminates the need for three-wire earthed cord and earthed power
supply system.
Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There
is an increased risk of electric shock if your body is earthed.
Do not expose power tools to rain or damp conditions. There is an increased risk of electric shock if
water enters a power tool.
Be careful with the power cord. Never use the cord to carry or pull the power tool or to pull out the
plug from the mains socket. Keep the power cord away from heat, oil, sharp edges and moving
parts. Replace damaged power cords immediately. Damaged cords increase the risk of electric
shock.
If using the machine outdoors, only use an extension cord approved for outdoor use. This reduces
the risk of electric shock.
Personal safety
Pay attention to what you are doing. Remember to use all necessary safety precautions and
common sense when working with power tools. Never use power tools if you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention when using a power tool can
result in serious personal injury.
Wear appropriate clothing. Do not wear loose-fitting clothing or jewellery. Wear a hair net if you
have long hair. Keep hair, clothing and gloves away from moving parts. Loose-fitting clothing,
jewellery and long hair can get caught in moving parts.
Avoid accidental starting. Make sure the power switch is in the OFF position before plugging in the
cord. Carrying a power tool with your finger on the switch or connecting a tool to the mains supply
when the switch is in the ON position increases the risk of accidents and injuries.
Remove adjuster keys/spanners and other assembling tools before starting the power tool.
Spanners, keys or similar that are left in a rotating part of the power tool can cause personal injury.
Do not overreach. Always maintain a firm footing and good balance. This will ensure you have
better control over the tool in unexpected situations.
Use protective equipment. Always wear eye protection. Use a dust mask, non-slip safety shoes,
safety helmet and ear protection, depending on the power tool type and usage. Normal glasses or
sunglasses are NOT sufficient eye protection.
Use and care
Secure the workpiece on a stable surface with clamps or similar. Do not hold the workpiece in your
hand or against your body as this is unstable and can result in a loss of control.
Do not force the tool. Always use the correct tool for the job. The tool does the job better and safer
when used at the rate for which it was designed.
Do not use the tool if it cannot be switched on and off using the power switch. Power tools that
cannot be controlled with the power switch are dangerous and must be repaired.
Содержание 029-062
Страница 25: ......
