Meec tools 017081, Руководство по эксплуатации

Страница: 30 / 32

ENGLISH
30
Using for the first time
1. Lubricate the tool before use according to the instructions in the section on care and maintenance.
2. Remove the cover from the air intake and fit the male connector.
3. Connect the air hose to the tool. Set the working pressure to 6.2 bar for best performance.
4. Press the trigger. Place the pad in the correct position to the plate that is to be cut. The pad can be adjusted
and placed to the left or right, depending on the application. Release the lock nut, turn the pad and blade
to the required position, and tighten the lock nut.
NOTE
Wind thread tape on the male connector and tighten with a spanner so that the connection is airtight. Do not
overtighten.
Replacing the pad and blade
Disconnect the compressed air supply.
1. Release the lock nut with a spanner.
2. Unscrew the pad with a spanner.
3. Unscrew the blade socket with the blade.
4. Insert a new blade in the socket.