Meec tools 017081, Руководство по эксплуатации

Страница: 29 / 32

ENGLISH
29
TECHNICAL DATA
Max. plate thickness 1.5 mm
Stroke rate 3800 spm
Average air consumption 276 l/min
Operating pressure 6.2 bar
Air inlet 1/4”
Air hose 3/8” inner diameter
Length 195 mm
Weight 0.83 kg
Sound pressure level, LpA 79 dB(A)
Sound power level, LwA 90 dB(A)
Vibration level 4.2 m/s²
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING
The actual vibration level when using power tools may differ from the specified maximum value,
depending on how the tool is used. It is therefore necessary to determine which safety precautions are required
to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all
stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the
start­up time).
USE
Configuration of the compressed air system
1. Pneumatic tool
2. Air hose, inner diameter 3/8’’
3. Lubricating device
4. Pressure regulator
5. Filter
6. Shut­off valve
7. Anti­vibration hose
8. Quick­release coupling
9. Drain cock (empty daily)
10. Pipe and connection, min. 1/2”
11. Air drier
12. Pipe and connection, min. 1”
13. Compressor
14. Water separator
15. Drain, condensate
Preparation
Check before assembly and use that all parts are available. If any part is missing or damaged, do not attempt
to assemble, install or use the product. Contact your dealer to obtain replacement parts.