EN
31
tool away. These safety precautions
reduce the risk of accidentally starting the
power tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Maintain power tools and accessories.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If a power tool is damaged it
must be repaired before it is used again.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those for
which they are intended to be used.
• Keep handles and grips clean, dry and free
from oil and grease. Greasy handles and
grips make it difficult to hold and control
the tool in unexpected situations.
• The product should be connected to the
mains via a residual current device with a
tripping current of
≤ 30 mA.
• A damaged cord or plug must be replaced
by an authorised service centre or
qualified person to ensure safe use.
• Double insulation does not replace
normal safety procedures when using the
product. The double insulation is intended
to provide extra protection from personal
injury in the event of an electrical
insulation fault in the product.
carrying the tool. Carrying a power tool
with your finger on the switch or
connecting a tool to the mains supply
when the switch is in the ON position
increases the risk of accidents and injuries.
• Remove adjuster keys/spanners before
switching on the power tool. Spanners or
the like that are left in a rotating part of
the power tool can cause personal injury.
• Do not overreach. Always maintain a firm
footing and good balance. This ensures
better control over the power tool in
unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery. Keep
your hair, clothing and gloves away from
moving parts. Loose-fitting clothing,
jewellery and long hair can get caught in
moving parts.
• If dust extraction and dust collection
equipment is available, this should be
connected and used correctly. The use of
such devices can reduce the risk of
dust-related problems.
• Do not allow familiarity with similar tools
to lead to exaggerated self-confidence
and to neglect the safety instructions for
the tool. A moment of inattention or
carelessness can result in serious personal
injury.
USING AND LOOKING AFTER
POWER TOOLS
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and more
safely when used at the rate for which it
was designed.
• Do not use the power tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the
battery before making any adjustments,
changing accessories or putting the power
Содержание 016366
