Meec tools 012588, Руководство по эксплуатации

Страница: 22 / 24

EN
22
Read the instructions.
Approved in accordance with
the relevant EU directives.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage 18 VDC
Speed, no load 0 – 2200 rpm
Stroke rate 0 – 3300 spm
Torque 150 Nm
Tool brackets 1/4"
Sound pressure level, LpA 106 dB(A), K=3 dB
Sound power level, LwA
117 dB(A), K=3 dB
Vibration 12.8 m/s², K=1.5 m/s²
Weight 1.2 kg
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 62841-2-2:2014.
WARNING!
The actual vibration and noise level when using
tools may differ from the specified maximum
value, depending on how the tool is used
and the material. It is therefore necessary to
determine which safety precautions are required
• Do not use damaged or modified
batteries, or power tools that are
damaged. Damaged or modified batteries
can behave unexpectedly and cause a fire,
explosion or risk of personal injury.
• Do not expose batteries or power tools to
naked flames or heat. Batteries can
explode when exposed to naked flames or
temperatures higher than 130°C.
• Follow the instructions for charging and
charge the battery only at the
temperature indicated in the instructions.
Incorrect charging or charging outside the
given temperature range can damage the
battery and cause a fire.
SERVICE
• Power tools must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
• Never attempt to repair damaged
batteries. The battery must only be
serviced by the manufacturer or at an
authorised service centre.
SPECIAL SAFETY INSTRUCTIONS
FOR DRILL DRIVERS AND IMPACT
WRENCHES
Hold the tool by the insulated grips when
working in areas where it could come into
contact with concealed cables or its own power
cord. Contact with a live cable will cause the
metal parts on the power tool to also become
live – risk of electric shock.
Symbols
The following symbols can be of importance
for how you should use your power tool.
Make sure you understand the symbols
and their significance.