Meec tools 012442, Руководство по эксплуатации

Страница: 27 / 60

EN
27
• Do not expose the battery to moisture.
• Do not burn the battery.
• Never try to open the battery.
• Rinse immediately with plenty of water if
battery fluid (25–30% strong potassium
hydroxide solution) has come into contact
with the skin. Neutralise the solution with
a weak acid, such as lemon juice or
vinegar. Rinse the eyes for at least ten
minutes with running water if the solution
has come into contact with the eyes, and
then seek medical attention.
EMISSIONS (DUST, NOISE)
• Excessive noise levels can cause hearing
impairments. Wear ear protection –
especially when working in closed rooms.
• Dust and splinters can cause eye injuries.
Wear safety glasses, or glasses with safety
glass.
• Dust is especially dangerous. Avoid
inhaling dust by wearing a suitable safety
mask.
• Always wear a helmet and safety shoes.
• Always wear tight-fitting safety clothing in
good condition.
• Do not wear loose-fitting jewellery, and tie
up long hair.
OTHER RISKS
• Even if the power tool is used correctly
there are always other risks that cannot
be fully excluded. Depending on the type
and design of the tool, the following
potential risks can occur:
• Contact with the unprotected part of the
saw blade (cut injuries).
• Contact with ejected parts of the saw
blade after breakage (cut injuries).
• Kickback or ejected parts of the workpiece
(shock injuries).
• Hearing loss if suitable ear protection is
not worn during the work (hearing
impairment).
• Harmful emissions of wood dust.
• Put the jigsaw in a safe place out of the
reach of children after finishing the job.
• The power tool must never come into
contact with hot surfaces or naked flames.
• The power tool must never come into
contact with water or other liquids, and
must only be cleaned with a dry cloth or
soft brush.
• It is recommended to wear safety glasses
when working with power tools. Always
wear a dust filter mask.
• Stop working with the power tool
immediately if you start to experience
discomfort, or the skin on your hands
becomes discoloured. Have a rest at
suitable intervals. There is a risk of hand/
arm vibration syndrome if the tool is not
handled properly.
• Avoid using the tool at temperatures
below 10°C.
SUPPLEMENTARY SAFETY
INSTRUCTIONS FOR CORDLESS
TOOLS
• Remove the battery before maintenance,
or if the tool is not going to be used for
some time.
• Only use the specified type of battery (see
technical data).
SAFETY INSTRUCTIONS
FOR BATTERIES
• Read the instructions and safety
instructions before charging the battery.
• Never use a damaged charger.
• The battery must only be repaired by an
authorised service centre.
• Avoid short circuiting the battery. Make
sure that the battery terminals do not
come into contact with metal objects.
• Do not store the battery in places where
the temperature can reach over 50°C,
e.g., in a car parked in the sun.