Meec tools 009639, Руководство по эксплуатации

Страница: 25 / 25

EN
25
Switch off the vacuum cleaner immediately,
pull out the plug and remove the water
before starting again.
BLOWER FUNCTION
1. Replace the cover for the blower
connection (22) with the blower
connection (21).
2. Move the hose (10) from the intake
opening (11) to the blower connection (21).
3. Put on the radiator nozzle (16), telescopic
tube (14) or just the handle (2).
4. Plug the plug into the mains.
5. Put the switch in run mode to start the
vacuum cleaner.
6. Adjust the air flow with the slider on the
handle.
MAINTENANCE
CLEANING THE CONTAINER
The suction power is reduced when the dust
container is full. Switch off the vacuum cleaner,
pull out the plug and empty the dust container.
1. Release the catch and lift off the cover.
2. Remove the cloth filter bag (18) and
empty the dust container.
3. Replace the cloth filter bag (18) and
replace the cover.
CLEANING THE FILTER
When necessary wash the cloth filter bag (18)
and HEPA filter (20) with warm water and a
mild detergent.
1. Take out the cloth filter bag (18) and HEPA
filter (20).
2. Wash by hand.
3. Allow to dry.
4. Replace the cloth filter bag (18) and HEPA
filter (20).
FIG. 9
WARNING!
Do not wash with water hotter than 40°C.