EN
47
TROUBLESHOOTING
The leaf blower will not start.
No power.
Check the power cord, plug,
power point and fuse. Replace
the fuse, or try another power
point. If the power cord or
plug get damaged they must
be replaced by an authorised
service centre.
Worn carbon brushes.
Contact an authorised service
centre.
Defective motor.
Contact an authorised service
centre.
Defective power switch.
Contact an authorised service
centre.
The suction tube and catcher,
or the blower tube and guard
are not correctly fitted.
Fit correctly according to the
instructions.
Loose contact in power supply.
Loose connection.
Check the connection.
Damaged power cord.
Contact an authorised service
centre.
Defective power switch.
Contact an authorised service
centre.
Poor or no suction capacity.
The catcher is full.
Empty the catcher.
The catcher is blocked.
Clear the catcher.
Impeller blocked or blower/
suction tube blocked.
See Maintenance section.
The extension cord is too long
or the cross-sectional area is
not dimensioned for the power
supply to the motor.
The extension cord must have
a cross-sectional area of at
least 2.5 mm² and must not
be longer than 25 m. The
extension cord must be fully
unreeled when in use.
The impeller does not move.
The impeller is blocked by
foreign object.
See Maintenance section.
Содержание 004908
Страница 4: ...1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 10 12 11 ...
Страница 5: ...4 5 8 9 6 7 ...
Страница 6: ...10 11 12 ...