EN
44
actual operating conditions (taking into account
all stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
1. Shoulder strap
2. Power switch
3. Motor unit
4. Power cord
5. Strain reliever
6. Mode selector
7. Catcher
8. Fastener for catcher
9. Wheel
10. Bottom tube
11. Screw hole for tube mounting
12. Top tube
13. Front handle
14. Shoulder strap fastener
FIG. 1
ASSEMBLY
FITTING THE TUBES
1. Fit the bottom tube in the top tube and
align the screw hole to insert the screw.
Lock the tubes together by tightening the
screw.
FIG. 2
FIG. 3
2. Put the wheel holder on the bottom tube.
Align the screw hole and firmly tighten the
screw to lock the wheel holder on the tube.
FIG. 4
FIG. 5
3. Put the complete tube on the motor unit.
4. Insert and tighten the screw to lock the
tube on the motor unit.
FIG. 6
FITTING THE CATCHER
1. Hook the outlet connection on the motor
unit.
FIG. 7
2. Press the catcher connection on the outlet
connection so that it clicks in place.
FIG. 8
3. Hook the catcher strap on the fastener on
the tube.
FIG. 9
4. Remove in the reverse order.
FITTING THE SHOULDER STRAP
1. Hook the shoulder strap on the shoulder
strap fastener.
2. Adjust the length of the shoulder strap for
correct working posture.
USE
INTENDED USE
• In blower mode the leaf blower is used to
quickly blow dry leaves and other similar
items away from inaccessible places.
• In vacuum mode it is used to pick up dry
leaves etc. In vacuum mode there is a
mulching function that reduces the volume
of the material and simplifies composting.
The mulching capacity depends on the size
and moistness of the particles.
Содержание 004908
Страница 4: ...1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 10 12 11 ...
Страница 5: ...4 5 8 9 6 7 ...
Страница 6: ...10 11 12 ...
