MEE TSD-AT1513-CN, Руководство пользователя

Страница: 41 / 48

17
Functions
6. Functions
■ Automatic image display
• This product has 10 kinds of signal timing and memorizes the video data. If the image on the screen fl ickers due to the PC-
connected with the monitor, adjust the displayed image according to P.13-P15.
• Even after using the factory-preset timing, you can change the displayed image settings on the screen (P.13-P15). If the set-
ting is changed, it will be memorized.
[Factory preset timings]
Signal timing
Dots X lines
Scanning frequency Synchronization
signal polarity
Remarks
Horiz. Vert. Horiz. Vert.
720×400 31.5kHz 70Hz - + TEXT
640×480 31.5kHz 60Hz - - VGA@60Hz
640×480 37.9kHz 72Hz - - VGA@72Hz
640×480 37.5kHz 75Hz - - VGA@75Hz
800×600 37.9kHz 60Hz + + SVGA@60Hz
800×600 48.1kHz 72Hz + + SVGA@72Hz
800×600 46.9kHz 75Hz + + SVGA@75Hz
1024×768 48.4kHz 60Hz - - XGA@60Hz
1024×768 56.5kHz 70Hz - - XGA@70Hz
1024×768 60.0kHz 75Hz + + XGA@75Hz
* The sequence of factory preset timing signals is different from this table.
• 10 kinds of signal timings can be memorized additionally.
• Input the desired signal timing and adjust the picture image (Refer to P.12) to let the monitor memorize their data
automatically.
• Picture image may not be displayed fully or may be displayed in rectangular with some input signals.
• If no image appears when speci
fi ed frequency (Horiz: 30.0 to 61.0kHz, Vert.: 55.0 to 75.4Hz) is used, change the refresh rate
or resolution of your PC.
● When signals other than resolution 1024X768 are input, the letter blots and the fi gure is distorted.
■ Power management function
By this function, the monitor shifts to a lower power consumption level when on but not in use, the screen turns dark. This func-
tion comes to ineffective if the connected PC has no power management function responding to VESA
TM
DPMS
TM
.
Mode Power
consumption
Power
Consumption
Power Indication
Under operation 25W or less Green
Power save mode 3W or less Orange
[Glossary] DPMS: Abbreviation for “Display Power Management Signaling”.
• It is impossible to reject the “Power management (POWER SAVE)” mode.
• There are some possibilities when no image is displayed on the screen.
If your PC connected to the monitor has the power management function,
The monitor shifts to a lower power consumption level when on but not in use (The screen turns dark.).
You can release it when touch the screen, press a key on the keyboard or move the mouse.
If no image appears even after the power management is released, or if your PC connected with the monitor has
no power management function,
- Check to make sure the signal cable is completely connected.
- Check to make sure the PC should be on.