POWER
OUTPUT (RX)
OPTICAL
ANALOG
INPUT (TX)
OPTICAL
ANALOG
MODE
POWER
OUTPUT (RX)
OPTICAL
ANALOG
INPUT (TX)
OPTICAL
ANALOG
MODE
POWER
OUTPUT (RX)
OPTICAL
ANALOG
INPUT (TX)
OPTICAL
ANALOG
MODE
POWER
OUTPUT (RX)
OPTICAL
ANALOG
INPUT (TX)
OPTICAL
ANALOG
MODE
POWER
OUTPUT (RX)
OPTICAL
ANALOG
INPU
T (TX)
OPTICAL
ANALOG
TX
RX
VOLUME
+
MODE
OPTICAL
ANALOG
aptX-LL
aptX SBC
1
2
Ensure the
micro-USB power cable
is
plugged into the
micro-USB POWER port
of the
Connect Hub
.
Put your Bluetooth headphones in pairing
mode.
Consult the user manual of your
Bluetooth headphones if you are not
sure how to put them in pairing mode
Once the headphones are in pairing mode,
press and hold
BLUETOOTH button
for 4
seconds to put the
Connect Hub
in pairing
mode.
OPTIONAL: PAIR WITH
2ND BLUETOOTH HEADPHONES
Plug the other end into the
TV’s
DIGITAL AUDIO OUT
(OPTICAL) port
.
Plug
digital optical S/PDIF
audio cable
into the
OPTICAL INPUT
of the
Connect Hub
.
Plug
3.5 mm audio cable
into the
3.5 mm ANALOG INPUT
of the
Connect Hub
.
Plug the other
end into the TV’s
headphone jack.
Headphone jack may be located on rear,
side, front, or bottom of TV.
Choose
ONLY ONE audio cable supported by your TV
STEP 2
STEP 3
STEP 1
STEP 4
Press the
POWER button
to power on the
Connect Hub
.
PRESS &
HOLD 4 SEC
PAIRED
SOLID BLUE LIGHT
1.
1.
2.
PAIR WITH BLUETOOTH HEADPHONES
CHOICE A: OPTICAL
CHOICE B: 3.5 MM
CHOICE C: RCA
POWER ON
3.
Ensure
the
TX / RX
switch
is
in the
TX
position.
4.
Proceed to
5.
OR
OR
3.
4.
2.
3.
1.
1.
2.
OPTICAL
DIGITAL AUDIO OUT
Press the
MODE button
to select
ANALOG
audio input.
1.
Press the
MODE button
to select
ANALOG
audio input.
2.
Plug red/white ends of
RCA audio cable
into the TV’s red/white
RCA AUDIO OUT
port
.
Change audio output settings to “VARIABLE”.
Set TV’s internal speakers to “OFF”.
**Exact menu and item names may vary
between TVs.
AUDIO OUT
R L
settings
sound / audio
Analog audio out
fixed
variable
settings
sound / audio
tv speakers
on
off
STEP 2
3.
If you need to pair a second Bluetooth
headphone, see below. Otherwise,
proceed to
STEP 3
Blinking red and blue light will change to
solid blue light once successfully paired.
Test for sound. Make sure the volume on both
your TV and headphones is turned up.
6.
5.
Press the
MODE button
to select
OPTICAL
audio input.
1.
Proceed to
STEP 4
3.
Proceed to
STEP 4
3.
Proceed to
STEP 3
Use the procedure above to pair a second
headphone after one is already connected.
Change
Sound Output
to “Optical”**
Change
Digital Audio Output Format
to
“STEREO” or “PCM”**
†
This may also need to done in the audio
output settings menu(s) of your streaming
app(s) and/or device(s) such as Apple TV
®
**Exact menu and item names may vary
between TVs.
†
On some TVs settings may be located in
“Advanced settings” or “Expert settings”
submenus.
1.
2.
settings
expert settings
Audio Output format
auto
dolby digital
pcm / stereo
DTS
settings
Sound / Audio
sound Output
hdmi
optical
tv speaker
NO SOUND? CHECK YOUR TV SETTINGS.
5.
Proceed to
STEP 4
Test for sound. Make sure the volume on
both your TV and headphones is turned up.
4.
Test for sound. Make sure the volume on
both your TV and headphones is turned up.
RCA jacks on TV must be designated
an
AUDIO OUT
. RCA input jacks,
commonly labeled AV IN, INPUT, or
COMPONENT will not work.
5.
4.
Proceed to
STEP 4
NO SOUND? CHECK YOUR TV SETTINGS.
3.
Proceed to
STEP 4
TX (TRANSMITTER) MODE
COMPLETE ALL 4 STEPS.
REMEMBER TO PLUG IN ONE
POWER CABLE
AND ONE
AUDIO CABLE
NEED HELP?
VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL
below into your web browser:
MEEaudio.com/HubVid
RCA
audio cable
Digital optical S/PDIF
audio cable
Micro-USB
power cable
3.5 mm
audio cable
CONTENTS:
PRODUCT OVERVIEW:
VO
LU
ME+
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
VOLU
ME+
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
TWO HEADPHONES PAIRED
TWO SOLID BLUE LIGHTS
VOLU
ME+
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
Plug 3.5 mm end of
RCA audio cable i
nto
the
3.5 mm ANALOG INPUT
of the
Connect Hub
.
3.
Remove protective caps from both ends of the
digital optical S/PDIF audio cable
2.
TX
RX
Plug the USB
end of the
cable into an
AC adapter, TV,
or computer
USB port.
2.
USE IN TX (TRANSMITTER) MODE
Start here to use the
Connect Hub
in
TX
(Transmitter) Mode
to stream audio from
your TV to Bluetooth headphones or
speakers.
For
RX (Receiver) Mode
see reverse side.
RX / TX switch
Micro-USB POWER port
OPTICAL audio OUTPUT
OPTICAL audio INPUT
ANALOG audio OUTPUT
ANALOG audio INPUT
GETTING STARTED
BLUETOOTH
button
POWER button
VOLUME
BOOST
button
MODE button
VOLU
ME+
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
1
2
PAIRING
BLINKING RED AND BLUE LIGHT
PRESS &
HOLD 4 SEC
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
PAIRING 2ND HEADPHONE
BLINKING RED AND BLUE LIGHT
Use TX (Transmitter) Mode to stream audio from your TV to bluetooth headphones or speakers. For RX (Receiver) Mode see below.
ADJUSTING VOLUME
SUBSEQUENT USE
If you are using the
Optical cable
, you may
mute the TV speakers, which allows you to
directly control the volume on your
Bluetooth headphones.
Note: when using the 3.5 mm audio cable
or the RCA audio cable, the Volume Boost
() button can be used to amplify
the audio signal. Pressing the
button repeatedly will cycle through the
three available volume boost levels.
Maximize the volume level on your TV, then
use volume controls on headphones to
adjust to preferred volume.
WHEN FINISHED, power off headphones
until next use
Volume
max vol+
WHEN READY TO USE AGAIN, POWER ON THE
HEADPHONES AND THEY WILL RECONNECT
AUTOMATICALLY.
If your headphones do not automatically
reconnect, tap the
BLUETOOTH button
on the
Connect Hub
to initiate reconnection.
Do not put the
Connect Hub
or your
headphones into pairing mode.
A solid blue light on the Connect will indicate
that a connection has been re-established.
DISABLING VOICE PROMPTS
The voice prompts of the
Connect Hub
can be
disabled for uninterrupted listening. Press and
hold the
Volume Boost () button for 7
seconds to disable voice prompts. Press and
hold for 7 seconds again to re-enable.
MODE
OPTICAL
ANALOG
aptX-LL
aptX
SBC
