GENERAL SAFETY INSTRUCTIONS
SAFETY RULES FOR THE INSTALLER
•
WARNING! In order to ensure personal safety, it is important to follow all instructions carefully. Improper installa
-
tion or improper use may result in serious personal injury.
•
This installation manual is an integral part of the product and must be delivered to the user. Keep this installation
manual and all information material.
•
This product has been designed and built exclusively for the use indicated in this manual.
•
Any application not indicated could be harmful to the equipment and/or represent a source of danger.
•
To ensure proper operation of the mechanism and an adequate degree of safety, use only original spare parts,
accessories and fixtures.
•
Do not install the device in an explosive atmosphere. The presence of flammable gases or fumes implies a seri
-
ous safety hazard.
•
The mechanism has a torque and anti-crush controller in the BACN version. However, other safety devices (e.g.,
photocells, sensitive strips, etc.) must also be installed to prevent dangers arising from moving mechanical ac
-
tions (crushing, dragging, shearing).
•
For each installation it is necessary to use at least one light-signalling device, as well as a sign correctly attached
to the gate structure.
•
Installation, electrical connection, adjustments and maintenance of the appliance must be carried out exclusively
by professionally qualified technical personnel. Wrong installation or improper use of the product can cause seri
-
ous damage to people or property.
•
Always install a differential with a value of 0.03 A. and a thermomagnetic switch with an opening of the contacts
of at least 3 mm provided with overload and short circuit protection.
•
Connect the yellow-green ground cable to the terminal marked with the symbol on the control panel, the safety of
this appliance is guaranteed only when the mechanism is connected to a proper ground installation according to
the applicable regulations.
•
The mechanism must not be put into definitive operation before all the connections have been made, the effi
-
ciency of the safety devices controlled and the pushing force configured to the minimum, in compliance with the
regulations in force concerning automatic doors (Directive 89/392 and standards EN 12453 and EN 12445).
•
Ensure gate structure is solid, balanced and suitable to be activated, ensure that the gate does not have friction
points during its movement
SAFETY RULES FOR THE USER
•
In case of malfunction, do not attempt to repair and contact a specialist technician.
•
Do not allow children or pets to approach the gate. Never let children stand or play with gate controls. Keep re
-
mote controls away from children and users who are not authorized to operate them; keep controls where unau
-
thorized users or children cannot access them.
•
In the event of a power failure or emergency, you must know how to release the gate to be able to manipulate it
manually.
•
Please keep these safety instructions. Please make sure everyone who uses or is near the gate is aware of the
hazards related to automatic gates. If you sell the property with the gate mechanism or sell the mechanism sepa
-
rately, please provide the new owner with a copy of these safety instructions.
2 of 11
