Medva ECO240 BAC, Инструкция по эксплуатации

Страница: 2 / 16

Declaration of Conformity
Name or Company Name:
Medva Mecanismos del Valles, S.L.
Address: C/ Natación 26-28 Pol. Ind. Can Roses - 08191 Rubí
Tax Identification Number (CIF/NIF): B-60528015
HEREBY CERTIFIES THAT:
That hydraulic equipment ECO240, EC0280 and ECO360 has been manufactured to be incorporated into a machine
or to be assembled with other machinery to manufacture a machine in accordance with Directive 2006/42/EC:
Meets the essential safety requirements of the following EEC directives.
2006/95/EC Low Voltage Directive.
2004/108/EC Electromagnetic Compatibility Directive.
Likewise, it declares that the machinery may not be operated until the machine in which it must be incorporated or of which it will be a
component has been identified and declared to comply with the terms of Directive 2006/42/EEC and subsequent amendments.
-We put the CE conformity marking on the machine
Plate number:
It is hereby certified in Rubí, on 24 May 2012
The Managing Director
ANTONIO ORANTES ZAMBRANO
SECURITY WARNING
Risk of crushing
Improper handling of machinery in operation may pose a risk of injury to fingers and hands. During the in -
stallation process, extend the rod completely either hydraulically or electrically, and connect the front support
manually without electrical connection. During operation, avoid any type of handling of the rod, especially if
the mechanical stop is installed.
Electrical hazard
Contact may cause electric shock, so make sure the device is disconnected from the power supply prior to
performing any wiring manipulation.