Medtrum A7 TouchCare, Руководство пользователя

Страница: 26 / 48


Or you long-press the power key for about 6 seconds, a yellow light will go
on for about 2 seconds, indicating that the shutdown is completed.
3.1.2 Charge the PDM
It is recommended to fully charge the PDM the first time it is used.
As a safety measure, the PDM will give you " PDM BATTERY LOW " or " PDM
CHARGE NOW " alert when you keep the PDM working at a low power level. If
you receive a
PDM BATTERY LOW
alert, respond to the alert and continue.
Though the PDM will still function normally, the battery life could be
decreased.
The PDM requires an AC adapter with an output of DC 5.0V that complies with
IEC
60601-1 and IEC 60950 such as UES06WNCPU-050
100SPA, (input: 100-240V, 50/60Hz, 0.2A; output: 5.0V DC, 1.0A). The adapter
is designed as a part of the ME system.
Note
:

Do not use other types of chargers. Otherwise the PDM may not work
normally.

You must charge the PDM when the battery is low to keep using the PDM.
If the battery is exhausted, the PDM will shut down automatically.

Even if the PDM is exhausted, or if the PDM is mistaken, the setup
information stored in the PDM will not be lost.

It takes at least 1 hour to fully charge. Usually, the handheld is fully
charged, available for handhelds for 1 weeks.

Blue light flashes when PDM is charging, and the green light is always on
indicates full charge.

Don’t change the battery of the PDM at any time.

Only person
（
including patient
）
with adequate training is permitted to