Medtronic MIDAS REX LEGEND GOLD, Руководство по профилактическому обслуживанию

Страница: 20 / 29

18
Scheduled Maintenance Intervals 1, 2, 3, 5, 6, 7, 9, 10, 11
Motor
1. Visually inspect the exhaust (green) hose and ensure that it does not have any nicks, cracks, holes, tears, or other visible
signs of wear.
2. Wipe the external surface of the exhaust (green) hose with a cloth. Perform the heat and seal check below (Step 6) and then
inspect the hose. If an oily fi lm remains on the hose, DO NOT use and return the motor to MPSS for service.
3. Visually inspect the Lubricant/Diff user connection and ensure that the seals are present and that the connection area does
not show any signs of damage that would prevent the lubricant cartridge from fi tting properly.
4. Visually inspect the air fi tting and ensure that it does not exhibit any signs of damage.
5. Visually inspect the etching and ensure that it remains legible.
6. Heat and Seal Check
• Attach and lock a straight or footed attachment onto the motor. Check to ensure that there is a tactile feel and an
audible click when the attachment is locked on the motor.
• Connect the motor to a Foot Control unit attached to a compressed gas source.
• Run the motor for 5 minutes.
• Feel the motor case and the attachment base and ensure they are not uncomfortably hot to the touch.
• Remove the Attachment and visually inspect the tool collet area, and the fi nger control valve area (for Gold Touch
Motors) for any signs of oil.
7. (Gold Touch only) Run the motor for a short duration and then release the fi nger control lever. If the motor continues to
run aft er the fi nger control lever is released, DO NOT use and return the motor to MPSS for service.
8. (Gold Touch only) Visually inspect the fi nger control lever and safety slide for any signs of debris or damage. Ensure the
lever moves freely.