Medtronic Guardian RT MMT-7900, Руководство пользователя

Страница: 15 / 128

Introduction 9
The Sensor should be removed if redness, pain, tenderness, or swelling develop at the insertion site, or if
you experience unexplained fevers. Check site often for these conditions and to make sure Sensor is still
in place, especially before going to bed and upon waking.
Confirm symptoms of low blood glucose and high blood glucose, as well as displayed glucose values and
alerts, with a home blood glucose meter available from your doctor or pharmacy.
The Sensor is sterile and non-pyrogenic unless the package has been opened or damaged. Do not use any
Sensor if its sterile package has been previously opened or damaged. Always inspect packaging for
damage prior to use. Do not use a Sensor that exceeds the expiration date printed on the package.
Remove plastic needle cover before inserting Sensor.
If Sensor is not securely placed in Sen-serter prior to insertion, pain or minor injury may occur.
Never point loaded Sen-serter toward any body part where insertion is not desired.
Precautions
Monitor
You should be trained by your healthcare professional on how to program and operate the Monitor and
respond to alarm/alert conditions before using the system.
Do not expose the Monitor to water. The Monitor should be set aside or placed in a Shower-Pak™ (MMT-
117) before doing activities in which the Monitor would be expected to get wet.
Contact sports or other activities may damage the Monitor and should be avoided. Prior to exercising,
make sure the Sensor is firmly attached.
If the Monitor shows a NO POWER alarm on the display, there will be an immediate shut-off as soon as the
alarm is acknowledged, and data collection will automatically stop. Batteries must be replaced
immediately to avoid the need for Sensor replacement and potential loss of data stored in memory. Upon
battery replacement, a SEARCH must be performed. (Refer to Searching for the Transmitter section in
Chapter 2: Getting Started.)