MedRx Avant REM+, Руководство пользователя

Страница: 16 / 40

D ‐ 0125127 ‐ C
16
Step-by-Step Guide to Live
Speech Mapping
Ensure that the Audiogram is entered
Before making Live Speech Mapping measurements, the patient’s pure
tone audiogram must be available to the software. This can occur
several ways:
1. The audiogram was automatically entered by MedRx Studio
software when testing.
2. The audiogram was manually entered into the Noah audiogram
module or Noah 4 software and saved.
3. The audiogram was entered using another manufacturer’s
audiogram module.
If none of these have occurred,
you may manually enter the
audiometric data into the REM
software as follows:
1. Under General, then Shown
Tests, select show Tone.
2. Select AUD module located at the top left of the
software.
3. Using your mouse, select the test ear.
4. Select the test type AC.
5. Enter thresholds by clicking the intersection points with the
mouse. (You may also enter the audiogram by selecting the
audio tab in either the REM or HLS/MHA screens).
6. Repeat for UCL (Bone and MCL optional).
7. Repeat steps 3 ‐ 5 for the other ear.
After the audiogram is entered, click the LSM button to
return to the MedRx Studio LSM testing screen.
The Operator Headphone (optional) is used by the operator to
monitor the signal being received by the probe microphone.