8
Front Wheel Assembly
1.
When inserting the front wheel make sure the
FRONT
sticker is pointed
toward the front and away from rollator
(see Figure A)
.
2.
Insert wheel to desired height depicted by numbered holes (set to the same
number as rear wheels)
(see Figure B)
.
3.
Place triangular hand screw into hole. Make sure triangular hand screw stays
outside of rollator frame
(see Figure B)
.
4.
Tighten triangular screw
(Important: Hand Tighten Only!)
until secure
(see
Figure C).
5.
Repeat steps 1-4 for other front wheel.
Figure A
Figure B
b
Figure C
Figure D
