MEDIZS Smart RK11, Руководство пользователя

Страница: 25 / 49

24
(SUP), bottom side from the center of cornea (INF), from the center of cornea to
the temple of examinee, and from the center of cornea to the nose of examinee.
Measurement sequence is ‘CENTER

SUP

INF

TEM

NAS’.
▣Operation Buttons & Wheel functions in PK mode
KEY Function Description
SET/OK Configure Operate Configure mode
LEFT - -
RIGHT - -
UP Result Display measurement result
DOWN Print Print measurement result
WHEEL_LEFT Mode Select Select measurement mode
WHEEL_RIGHT Mode Select Select measurement mode
1. Rotate the Operation Buttons & Wheel until PK mode is displayed on the
screen.
2. Check whether PK mode is displayed on the screen.
3. Measuring point mark on the screen will indicate the center.
4. Focus to match with the height of examinee’s eye.

Refer to the section
6-5
and
7-1
’3~4’.
5. Measuring center of Cornea
①
Press the Measure Button to measure center of cornea.
②
After finishing the measurement, result is displayed on the screen.
③
Curvature on center of cornea is same as curvature which measured on KER
mode.
6. Measuring periphery of Cornea

There are 4 marks of measuring point (top/bottom/left/right side of mire
ring). When measurement value existed, the mark is filled with color. When
the value not existed, the mark is empty.

If periphery measuring is started, measuring point mark blinks. At the same