13
Rotate the stage clamping bolt located in the bottom of body counterclock-
wise and release. [Fig.5]
[Fig.6]
Rotate the stage holding lever to ‘UNFIXING’ direction. [Fig.6]
[Fig. 7]
push the stage to right side and then fasten the stage fixing knob by rotating
it clockwise. and do the same on left side. [Fig.7]
Check whether stage is moving freely
5-2
Connecting the power cable
Connecting the power cable to the connector on the bottom of main body.
Plug into AC outlet after switch off the instrument.
5-3
Putting rest papers (Refer to 9-4 Replacement of paper)
Pick out both holding pins on chin rest.
Insert both pins into holes on chin rest papers and stick it on chin rest.
5-4
Engage printing papers
Refer to 9-4 Replacement of paper.
