MediSure DGEMP01M, Руководство пользователя

Страница: 23 / 44

12
Performing a Blood Glucose Test
To perform a blood glucose test, you will need: (b), (c), (e) and (f).
1.
Insert the test strip to turn on the meter
Wait for the meter to display the “ ” and “ ”.
2.
Select the appropriate measuring mode by pressing M.
3.
Obtaining a blood sample (k)
Use the pre-set lancing device to puncture the desired site. Wipe
off the first appeared drop of blood with a clean cotton swab.
The size of the drop should be at least as big as
․
(actual size),
which is 0.5 microliter (μL) of volume. Gently squeeze the
punctured area to obtain another drop of blood. Be careful NOT
to smear the blood sample.
4.
Apply the sample (l)
Gently apply the drop of blood to the absorbent hole of the test
strip at a tilted angle. Confirmation window should be completely
filled if enough blood sample has been applied. Do
NOT remove
your finger until you hear a beep sound.
NOTE:
⚫ Do not press the punctured site against the test strip or try to smear the
blood.
⚫ If you do not apply a blood sample to the test strip within 3 minutes, the
meter will automatically turn off. You must remove and reinsert the test strip
to start a new test.
⚫ The confirmation window should be filled with blood before the meter
begins to count down.
NEVER try to add more blood to the test strip after
the drop of blood has moved away. Discard the used test strip and retest
with a new one.
⚫ If you have trouble filling the confirmation window, please contact your
health care professional or the local customer service for assistance.