18 of 22
Phone:
1300 884 987
Internet: www.medion.com.au
After sales support
8.4. Inserting and changing the nib
8.4.1. Inserting the nib
Push the nib carefully into the nib socket on the end of the
stylus.
ATTENTION!
When inserting a nib, do not exert too much pressure as this could damage
the nib and/or your stylus.
8.4.2. Removing the nib
Use the supplied tweezers to pull the nib out of the stylus.
After you have successfully removed the nib, you can insert
a new one.
Use your fingers to carefully insert the new nib into the
stylus.
9. Maintenance
9.1. Repairs
Please contact our service centre if you have technical problems with your device.
Repairs should only be performed by our authorised service partners.
Disconnect the device from the power supply immediately and contact our
customer service if...
•
any liquid has got into the device.
•
the device is not working properly.
•
the device has been dropped or the housing is damaged.
9.2. Cleaning
•
Please ensure the device does not become soiled, in particular the input area.
•
Clean the device using a soft, moist cloth.
•
Do not use solvents, corrosive or aerosol-based detergents to clean the device.
86935 EN ALDI AUS Content final REV4.indd 18
86935 EN ALDI AUS Content final REV4.indd 18
06.06.2013 12:00:40
06.06.2013 12:00:40
