Medion P64124 MD 84295, Руководство пользователя

Страница: 20 / 35

20 AFTER SALES SUPPORT
AUS
1300 884 987 www.medion.com.au
AUS
Setting up a Bluetooth connection
supplied – available from specialist retailers).
1. Set the audio device to a medium volume. Then switch the device off.
2. Remove the protective cap from the optical port. Insert the plug into the
OPTICAL port on the soundbar.
3. Insert the other plug into the corresponding digital output socket on your
digital receiver or television.
NOTE!
If no sound signal is output, change the audio output format on the output
device to PCM mode (pulse code modulation).
Connecting devices via HDMI (ARC)
You will need an HDMI cable (see Fig. variant D). The HDMI cable is not
supplied.
1. Set the audio device to a medium volume. Then switch the device off.
2. Connect the HDMI port with the HDMI IN port on your television.
3. Activate the functions ARC and CEC and switch sound output to PCM on the
connected devices. See also the operating instructions of the connected
devices.
ARC makes it possible with two connected devices not only to receive audio
signals via HDMI but also to send them back again via the same cable.
CEC (consumer electronics control) allows communication between all HDMI-
connected devices. You can then control their volume and muting using the
remote control of the television.
NOTE!
ARC only works with devices that are HDMI ARC-capable and also requires an
HDMI 1.4 cable (or higher).
Setting up a Bluetooth connection
Bluetooth operation enables the wireless reception of audio signals from an
external Bluetooth-compatible audio output device. Ensure that the distance
between the two devices is not greater than 8 metres.
To connect a Bluetooth-compatible audio output device, follow these steps:
84295_P64124 DE Aldi AUS Content Final REV1.indd 20 84295_P64124 DE Aldi AUS Content Final REV1.indd 20 27.08.2015 09:29:48 27.08.2015 09:29:48