Medion P64124 MD 84295, Руководство пользователя

Страница: 17 / 35

17 AFTER SALES SUPPORT
AUS
1300 884 987 www.medion.com.au
AUS
Inserting batteries into the remote control
Inserting batteries into the remote control
The remote control is supplied with a 3 V CR2025 lithium battery already
inserted.
NOTE!
− When you use the remote control for the fi rst time, pull out the transpar-
ent strip without opening the battery compartment (see Fig. G ).
If the device fails to respond or is slow to respond to the remote control, you
will need to change the battery. Proceed as follows to change the battery:
1. Press the catch (b) and remove the battery holder complete with battery
(a) from the remote control. Dispose of the dead battery in accordance with
the legal requirements (see
Fig. H ).
2. Insert a new 3 V CR2025 battery in the holder (c) with the positive terminal
facing upwards. Always make sure the battery is the right way round (see
Fig. I ).
3. Push the battery holder complete with battery back into the slot (d) in the
remote control as far as it will go (see Fig. J ).
Installing the soundbar
There are three options for installing the soundbar:
standing (as two tower speakers), lying down or mounted to the wall.
Option 1: standing speakers
1. Take the right
3
and left
1
speakers and connect them to the
corresponding feet
13
(see Fig. D ).
2. Ensure that the connectors on each speaker fit perfectly into the stand (see
Fig. D/a and b ).
3. Hold the stand firmly and rotate the speaker in the direction of the closed
lock icon.
4. Place the speakers on a stable, level surface close to a power outlet.
5. Connect the speaker cables of the two speakers as shown in Fig. D/c .
84295_P64124 DE Aldi AUS Content Final REV1.indd 17 84295_P64124 DE Aldi AUS Content Final REV1.indd 17 27.08.2015 09:29:48 27.08.2015 09:29:48