Medion MP3 PLAYER, Руководство по эксплуатации

Страница: 32 / 80

English
26
Note
If you want to fix the holder to the wind screen, then you can skip
steps 1 and 2.
Note
Your navigation system can also be equipped alternatively with a fle-
xible swan-neck car mounting according to the version.
1. Remove the protective foil from the sticky side of the suction plate.
2. Fix the suction plate to a suitable location on the dashboard. Take care, that
the surface of the dashboard is clean and press the suction plate strongly
onto the surface.
Note
To obtain a strong and secure hold the suction plate should not be
used for 24 hours.
It cannot be excluded completely that certain plastics, strong solar
radiation, etc. will affect or soften the adhesive strips and will be able
to damage the surface of the dashboard through this.
We shall not accept any liability for damage to the dashboard that
may occur.
3. Connect the suction plate to the holder. Pay attention to the lettering on the
holder. The connection must engage audibly (Illustration, see the following
page).
II. Fixing the Suction Plate
Note
Clean the disk thoroughly with a glass cleaner. Warm the disk and the
nipple slightly at temperatures below 15° C.
Place the holder with the suction head directly onto the wind screen and press the
lever on the suction head downwards. The sucker will attach itself to the back-
ground firmly.