Front Operating elements
11
DE
EN
FR
ES
DK
NL
Front Operating elements
(Ill.: Front operating elements)
Ref.
Button
Description
4
You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.
+
Power block, when the OSD is not activated
+
OSD block, when the OSD is not activated
Hold the key combination until the bar displayed has moved from left to
right completely, to activate/de-activate the block. A corresponding message
will appear on the screen.
5
Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: direct call-up of the
Contrast
/
Brightness
menu.
6
Select a parameter and increase its value with this button, when the OSD is
switched on.
When the OSD is not active: direct access to the
Aspect Ratio
menu.
7
Confirm the selection of the parameter to be changed with this button.
When the OSD is not active: direct access to the
Auto Image Adjust
menu.
8
You can switch the TFT monitor on or to the Standby mode with this button.
9
Operational display
Shows the operational state. Please also refer to page 14.
