MD 9028 BDA GB 27.08.2002 9:42 Uhr Seite 6
SETTING UP THE CAMERA/VIDEO SENDER, POWER SUPPLY
2.4 GHz Video
Antenna
Plug power
supply in here.
Important:
Unplug
power supply before
unplugging power jack.
Plug into
any AC
outlet
Set channel switch to
match setting on
Video Receiver.
Outdoors
Indoors
Attach camera to a
wall, indoors or
outdoors.
Set codes
wheels.
HOOKING UP THE VIDEO RECEIVER
1. Connect a set of Audio/Video
cables to the A/V OUT jacks on the
Video Receiver. Connect the other
end to your TV (use either L or R
channel for audio).
2. Plug the Video Receiver's Power
Supply jack (the power supply
with NO code wheels) into the
Video Receiver and plug the
power supply into a
230 V/~50 Hz wall outlet.
3. Turn the Video Receiver's
power switch (on side of unit)
on.
4. Set the channel switch to the
same letter as you set on the
camera, A, B, C, or D.
5. Position the Video Receiver in a
convenient location such as on
top of the TV and orient the antenna so that the flat side points in
the direction of the room where you set up the Camera/Video
Sender.
You can use the supplied coaxial
cable to connect the TV OUT
socket on the Video Receiver to
the Antenna input on your TV.
If you already have an antenna
connected to
your TV,
you will need to use a
TV antenna splitter.
Set your TV and the
TV Channel switch on
the Video Receiver
(on bottom) to the
same channel (3 or 4).
IF YOUR TV DOES NOT HAVE A/V CONNECTORS
