MD 9028 BDA GB 27.08.2002 9:42 Uhr Seite 2
CONTENTS
Controls and connections
7
Camera/Video Sender
and Video Receiver
7
Camera/Video Sender
8
Video Receiver
9
Connecting Up
10
Setting up the Power Supply
10
Setting up the Camera/Video Sender
11
Setting up the Video Receiver
12
Fine Tuning Your System
14
INTRODUCTION
Your Wireless Camera Kit consists of a Color Video Camera with
built-in 2.4 GHz Video Sender, and a Video Receiver unit which you
connect to a TV anywhere in your home (up to 100 ft. away from the
Camera). The Camera/Video Sender converts the video and audio
signals from the camera into a radio signals and transmits them
(even through walls) to the Video Receiver.
The Video Receiver converts the signals back to video and audio
signals which are fed through a cable to your TV's COAX or A/V
input jacks.
You can purchase additional cameras and power supplies so you
can have a multiple camera system. You can then set all cameras
to the same channel as the receiver and turn the cameras on and
off remotely so as to only ever have one camera turned on at a time.
There are just a few simple steps to follow to hook up your Camera
and Video Sender kit.
