41
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
Manually setting up DHCP on a Windows PC
In AP operation, the management IP address of
the repeater is set to 192.168.66.1. Please ensure
that the IP address of your PC is in the range
192.168.66.2~192.168.66.252.
To log in via the web interface, the IP address of your PC must
be manually set to a value in this range. The procedure for
this is described in the next section.
Setting the IP address in Windows XP
Click on the
START
button on the task bar and then
on
Control Panel
.
Double-click on
Network Connections
and then
click on
Display connection status
.
Select
Local Internet settings
. The window
Local area connection status
appears. Click on
properties.
Select the entry
Internet Protocol (TCP/IP) –
General
and then enter the IP address as described
below:
• IP address: 192.168.66.x (where x can be any number
between 2 and 200. If more than one computer is
using this access point, each computer must use its
own number)
• Subnet mask: 255.255.255.0
To finish, click on
OK
.
86738 EN ALDI AUS Content RC2.indd 41
86738 EN ALDI AUS Content RC2.indd 41
29.08.2012 09:09:28
29.08.2012 09:09:28
