23
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
PLEASE NOTE!
After configuration, the repeater’s DHCP server
is deactivated and the DHCP server of the access
point whose signal is being amplified is used
instead.
After configuration
You can remove the LAN cable from the WiFi Range
Extender.
PLEASE NOTE!
You can also connect a LAN cable to the LAN
port on the WiFi Range Extender to connect to
the network for the access point whose signal is
being amplified by the WiFi Range Extender.
You can reposition the repeater at any location within
the range of the access point (home router). Please pay
attention here to the status of the wireless LED (lights
up when reception is good, flashes for poor reception).
Clients (other computers or wireless-capable devices)
within the range of the repeater can now be connected to
the WiFi Range Extender (by entering the network key or
via the WPS button).
PLEASE NOTE!
To call up the Quick Setup menu again at any
time, press down the
YRU
button for about 10
seconds, until the
RQYGT"NGF
flashes. The
repeater is now reset to the factory settings and
you can carry out the installation again.
See also „The Web Interface“ on page 40.
86738 EN ALDI AUS Content RC2.indd 23
86738 EN ALDI AUS Content RC2.indd 23
29.08.2012 09:09:27
29.08.2012 09:09:27
