Medion MD 86162, Руководство пользователя

Страница: 9 / 50

15 x 15 mm
14.10.2009 08:05
9
electricity supply to your device or to release the device from voltage
completely

Only operate the plug-in power pack at an AC 100-240 V~ 50 Hz
earthed socket. Ask your energy supplier, if you are not sure about the
power supply at the set-up location.

Only use the plug-in power pack supplied with the device. (Ktec
KSAD1200150W1UK). Never attempt to connect the plug of the plug-in
power pack at other sockets, because damage can be caused
otherwise.

We recommend the use of protection against excess voltage for
additional safety, in order to protect the device against damage by
voltage peaks or a flash of lightning from the electricity network.

Pull the plug-in power pack out of the socket to interrupt the power
supply.

The plug-in power pack must also be easily accessible after connection,
so that it can be separated from the mains quickly if needed.

Do not cover the plug-in power pack, to avoid overheating.

Pay attention that the cable complies with the VDE requirements, if you
use an extension cable. Ask your electrician if necessary.

Lay the cable so that no-one can tread on it or trip over it.

Do not place any objects on the cable, because it could be damaged
otherwise.