After Sales Support TEL: 1 300 884 987 WEB Support: www.medion.com.au
15
Operation
Switching the device on and off
1.
Press the On / Off switch [2] until the LCD
display [3] switches on and gives you in-
formation about the status of the device.
2.
Press the On / Off switch [2] again, in order
to switch the device off. The device will
switch off automatically if it has not been
used for some time.
Making notes
You should have made the following preparations before beginning to store your handwriting
notes:
•
Turn the device on (from Page 11).
•
Familiarize yourself with the symbols of the LCD display (Page 9).
•
Make sure you know the use of each of the Function keys (Page 10 and 17).
1.
Remove the pen cap [12] from your digital pen or pull the pen out of the pen cap at-
tached to the paper clamp.
The pen has no on and off switch. It will be activated automatically if it comes into the
proximity of the entry area and will switch off when it leaves this area.
2.
Write on the writable area. The Pen symbol will appear on the LCD display [3] while you
are writing. The symbol will change from an empty sheet (no data) to a dotted sheet (data
present), if the document was previously empty.
3.
Your note will be stored immediately, so that even an unintended switching off of your
device will not cause any loss of data.
4.
Switch the device off and put the pen back into the cap when you have finished making
notes.
Writable Area