E
E
N
NG
GLLIIS
SH
H
26
This leads to a maximum
allowed
number in
class II type failure:
Resolution Mill.
Pixel SubPixel Type
(s.above)
1024 x 768 (15")
0.786432
2.359296
2 2 4 - 2
1280 x 1024 (17,18, 19")
1.310720
3.932160
3 3 7 - 3
1600 x 1200 (19“)
1.920000
5.760000
4 4 10 - 4
Class I type failure only applies to special applications, e.g. medical applications,
and results in corresponding price increases. Class II type failure is the established
standard for quality conscious manufacturers with high quality displays.
Example 1:
A 15” - XGA-display consists of 1024 horizontal and 768 vertical picture dots
(pixel), which amounts to a total of 786,432 pixel. Related to one million pixels
this translates into a factor of about 0.8.
Class II type failure consequently allows for two defects each of type 1 and type 2
and 4 defects of type 3 and 2 clusters of type 3.
Example 2:
A 17” - SXGA-display consists of 1280 horizontal and 1024 vertical picture dots
(pixel), which amounts to a total of 1,31 million pixels. Based on one million pixels
this translates into a factor of about 1.31.
Class II type failure consequently allows for three defects each of type 1 and type
2 and 7 defects of type 3 and 3 cluster of type 3.
These cases are normally not covered by warranty.
If the number of failures exceeds the figures of any category mentioned above
then this may be covered by the warranty.
L
IABILITY LIMITATIONS
The contents of this manual are subject to unannounced changes caused by tech-
nical progress. Manufacturer and sales shall not be responsible for any damages
which have been caused as a result of omissions or errors in the information pro-
vided in this manual.
Under no circumstances shall we be liable for any of the following:
1.
Claims made against you by third parties based on loss or damage.
2.
Loss or damage to your blanks, recordings or data.
3.
Economic follow-on damage (including lost profit or savings) or associated
damage even in the case that we have been informed of the possibilities of
this type of damage.
In some countries the exclusion or limitation of accompanying or follow-on dam-
age is not legally accepted so that the above limitations do not come into force.
C
OPYING THIS MANUAL
This document contains legally protected information. All rights reserved.
Copying in mechanical, electronic and any other form without the written
approval of the manufacturer is prohibited.
