IT
EN
SI
HR
63
15. Troubleshooting
DANGER!
Risk of electric shock!
There is a risk of electric shock due to live parts.
Never try to open and/or repair an appliance compo-
nent yourself.
In the event of a fault, contact our Service Centre or
another suitable professional repair workshop.
Faults may occur during operation. Please use the following table to check whether
you can resolve the problem yourself. All other repairs are prohibited and invalidate
the warranty. Therefore, in the event of a fault, contact our Service Centre or anoth-
er suitable professional repair workshop.
Fault
Cause
Solution
The appliance is
not working.
Interruption in the
electrical circuit.
Check whether the mains
plug is plugged in.
Check that the connection ca-
ble is not damaged.
The tempera-
ture is not low
enough.
The door does not seal
properly or is opened
too often.
Arrange chilled goods so that
the door is not prevented
from closing properly.
Open the door for less time.
Check the door seal.
The tempera-
ture is not low
enough.
The appliance has
been set up in a loca-
tion exposed to direct
sunlight or next to a
heat source.
Place the appliance in a differ-
ent position.
Set the appliance to a higher
refrigeration level.
The appliance
makes too much
noise or vibrates.
The appliance has not
been set up properly.
Level.
Temperature con-
trol is not work-
ing.
The temperature sen-
sor is defective.
Contact customer services.
Содержание MD 37148
Страница 37: ...38 ...
Страница 105: ...106 ...